~Anti-static PEI
COLOR：Black
SIZE： Sheets：T x W x L 6-100mm×620mm×1230mm
Rods：Dia x L 6-150mm×1000mm
DATA SHEET
ITEM METHOD UNIT VALUE
Mechanical Properties
Specific gravity ASTM D792 g/cm3 1.27
Tensile yield strength ASTM D638 Mpa 110
Breaking elongation ASTM D638 % 60
Bending strength ASTM 790 Mpa 150
Flexural modulus ASTM 790 Mpa 3000
Shore hardness ASTM D2240 D 90
Impact strength ASTM D256 J/M 40
Thermal Properties
Melting point DSC ℃ 215
Heat distortion temperature ASTM D648 ℃ 210
Operating temperature(long term) - ℃ 180
operating temperature (short term) - ℃ 220
Thermal conductivity DIN 52612-1 W/(K-M) -
Coefficient of linear thermal expansion ASTM D696 10-5-1/K 3
Electrical Properties
Dielectric strength ASTM D150 KV-mm -
Dielectric loss factor ASTM D150 - -
Volume resistivity ASTM D257 Ω.cm 106-109
Surface resistivity ASTM D257 Ω 106-109
Dielectric constant ASTM D149 - -
Chemical Properties
Water absorption 23℃ 60%RH % 0.02
Acid resistance 23℃ 60%RH +
Alkali resistance +
Acid and alkali resistance +
Resistance to sodium chlorate +
Resistance to aromatic compounds +
Resistance to ketone 23℃ 60%RH -
Resistance to hot water 23℃ 60%RH +
Others
Flammability UL 94 V-0
Viscosity -
Non toxic EEC 90/128 FDA +
Coefficient of friction DIN 53375
Anti-ultraviolet -
Remarks:
1.“+”: positive “-”: negative “0”: depends condition.
2. All the parameters above are based on raw material but not finished products,
PEI+GF SHEETS/RODS
COLOR：BLACK
SIZE：SHEETS：T X WX L 6-100mm×620mm×1230mm
RODS：Dia. X L 6-150mm×1000mm
DATA SHEET
DATA SHEET DATA SHEET
Mechanical Properties
Specific gravity ASTM D792 g/cm3 1.51
Tensile yield strength ASTM D638 Mpa 235
Breaking elongation ASTM D638 % 20
Bending strength ASTM 790 Mpa 260
Flexural modulus ASTM 790 Mpa 4500
Shore hardness ASTM D2240 D 95
Impact strength ASTM D256 J/M 50
Thermal Properties
Melting point DSC ℃ -
Heat distortion temperature ASTM D648 ℃ -
Operating temperature(long term) - ℃ -
operating temperature (short term) - ℃ -
Thermal conductivity DIN 52612-1 W/(K-M) -
Coefficient of linear thermal expansion ASTM D696 10-5-1/K -
Electrical Properties
Dielectric strength ASTM D150 KV-mm -
Dielectric loss factor ASTM D150 - -
Volume resistivity ASTM D257 Ω.cm 1016
Surface resistivity ASTM D257 Ω 1016
Dielectric constant ASTM D149 - -
Chemical Properties
Water absorption 23℃ 60%RH % 0.16
Acid resistance 23℃ 60%RH +
Alkali resistance +
Acid and alkali resistance +
Resistance to sodium chlorate +
Resistance to aromatic compounds +
Resistance to ketone 23℃ 60%RH -
Resistance to hot water 23℃ 60%RH +
Others
Flammability UL 94 V-0
Viscosity -
Non toxic EEC 90/128 FDA +
Coefficient of friction DIN 53375
Anti-ultraviolet -
Remarks:
1.“+”: positive “-”: negative “0”: depends on condition.
2. All the parameters above are based on raw material but not finished products,
PEI SHEETS/ RODS
COLOR ： NATURAL、BLACK
SIZE： Sheets：T X WX L 6-100mm×620mm×1230mm
Rods：Dia. X L 6-150mm×1000mm
DATA SHEET
ITEM METHOD UNIT VALUE
Mechanical Properties
Specific gravity ASTM D792 g/cm3 1.27
Tensile yield strength ASTM D638 Mpa 110
Breaking elongation ASTM D638 % 60
Bending strength ASTM 790 Mpa 150
Flexural modulus ASTM 790 Mpa 3000
Shore hardness ASTM D2240 D 90
Impact strength ASTM D256 J/M 40
Thermal Properties
Melting point DSC ℃ 215
Heat distortion temperature ASTM D648 ℃ 210
Operating temperature(long term) - ℃ 170
Operating temperature(short term) - ℃ 200
Thermal conductivity DIN 52612-1 W/(K-M) -
Coefficient of linear thermal expansion ASTM D696 10-5-1/K 3
Electrical Properties
Dielectric strength ASTM D150 KV-mm 27
Dielectric loss factor ASTM D150 - 0.009
Volume resistivity ASTM D257 Ω.cm 1014
Surface resistivity ASTM D257 Ω 1016
Dielectric constant ASTM D149 - 3
Chemical Properties
Water absorption 23℃ 60%RH % 0.02
Acid resistance 23℃ 60%RH +
Alkali resistance +
Acid and alkali resistance +
Resistance to sodium chlorate +
Resistance to aromatic compounds +
Resistance to ketone 23℃ 60%RH -
Resistance to hot water 23℃ 60%RH +
Others
Flammability UL 94 V-0
Viscosity -
Non toxic EEC 90/128 FDA +
Coefficient of friction DIN 53375
Anti-ultraviolet -
Remarks:
1.“+”: positive “-”: negative “0”: depends on it conditions.
2. All the parameters above are based on raw material but not finished products,
